Operation
6.10 Operation with the IOP
6.10
Operation with the IOP
6.10.1
Overview
6.10.1.1
Introduction
Introduction
The Intelligent Operator Panel (IOP) optimizes the interface and communications options of
the SINAMICS inverter.
The IOP is connected to the inverter using an RS 232 interface.
The IOP supports (in conjunction with a PC with USB port ) the following functions:
● Download wizards
● Download additional languages
● Download IOP firmware updates
The downloads can be found on the Siemens Service and Support website:
Service & Support website (http://support.automation.siemens.com)
6.10.1.2
Screen icons
Screen symbols
A series of symbols showing different states appears in the upper right area of the IOP
display. These symbols are explained in the table below.
Table 6- 34
Function
Command source
Inverter state
294
Screen symbols
State
Auto
JOG
Manual
Ready
In operation
Symbol Remark
Displayed when the JOG function is activated.
Symbol rotates when the motor is running.
Operating Instructions, 12/2014, A5E32923362A
Inverter cabinet units