Nv Graphics Information Print Mode; Software Settings Mode - Epson TM-P20 Technical Reference Manual

NV graphics information print mode

Prints the following NV graphic information registered to the printers.
 NV graphics capacity
 NV graphics usage capacity
 NV graphics free capacity
 NV graphics registration
 Key code for each data, number of X direction dots, number of Y direction dots
 NV graphics data
For details on NV graphics, see
Follow the steps below.
1
After running a self test, hold down the FEED button for at least one second, and then
select the Mode selection.
The Mode selection guidance is printed, and the
2
After briefly (less than one second) pressing the FEED button once, hold it down for
at least one second, to print the NV graphics information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select "Exit and Reboot Printer".

Software settings mode

Set the printer's memory switch (customized value).
 Print density
 Automatic paper reduction
 Interface selection
 USB communications settings
 Print speed
 NV memory capacity
For details on the memory switch (customized value), see
56
"NV Graphics Memory" on page
Power LED flashes.
 Command execution during offline
 Transmission of status notice
 Buzzer control
 Automatic power off setting
 Paper position immediately after specific state
"Software Settings" on page
28.
47.