Bluetooth Interface - Epson TM-P20 Technical Reference Manual

Bluetooth Interface

Use a tool, such as a built-in Bluetooth connection tool of your device to establish the connection with the
printer. If your device is a Windows computer, use EPSON TM Bluetooth
pair a terminal and the printer. If your terminal is an iOS or Android terminal, use Epson TM Utility to easily
pair your terminal and the printer.
 If the host computer and the printer are not connected on a continuous basis but rather connected
every time the printer starts printing, some time may be needed for the printer to actually start
printing after the host computer commands printing. This pause is the time required for process-
ing the connection between the host computer and the printer, and it depends on the conditions
of the environment where used.
 If data transfer from an application of the host computer has already been completed, data might
remain in the Bluetooth module internal buffer. As such data remaining in the buffer might be lost
when the connection is cut off, use the status or similar functions to check that transmitted data
has been completely printed before cutting off the wireless connection.
 For detailed information about EPSON TM Bluetooth
User's Manual.
 The device name and passkey are editable with the TM-P20 Utility.
Setting up from a Smart Device
Necessary Items
Prepare the following items.
 Printer: TM-P20
 Device for setting: iOS or Android device
 Utility for setting: Epson TM Utility for iOS/Android
Running Epson TM Utility for iOS/Android
1
Run the Epson TM Utility for iOS/Android.
2
Set from "Bluetooth
Setup and Operation Work flow
1. Select the printer you want to connect to.
2. Enter the passkey.
3. Perform a test print.
®
Setup Wizard" in the menu.
®
Connector, which is a utility to easily
®
Connector, see the TM Bluetooth
Chapter 2 Setup
2
®
Connector
43