Web Interface Readings And Parameter Settings; User Access Login - AccuEnergy Acuvim II Series User Manual

Acuvim II Series - AXM WEB PUSH

10. Web Interface Readings and Parameter Settings

The AXM-WEB-PUSH module supports the HTTPS protocol to allow for the use of a
web interface. The user will need to visit access the AXM-WEB-PUSH web interface
to configure the module and use its functions. The web interface allows for remote
initial setup of the Acuvim II meter.
The AXM-WEB-PUSH web interface allows for different user access levels.
In the following cases, the IP address of the module will be "192.168.1.161".

10.1 User Access Login

Enter the correct IP address of the module in the search bar of the internet browser
to access the web interface of the AXM-WEB-PUSH.
The user will be redirected to a webpage prompting to select the Access Level and
enter appropriate password for that level.
The User level is ideal for users who need only to take readings and view status from
the meter.
view '.
The default password for the User level is '
It is recommended that no more than 5 users are logged in at the same time for this
level to ensure optimal performance of web interface.
The Admin level is ideal for users who need access to configurations on the meter or
the web interface and to view readings.
admin '.
The default password for the Admin level is '
The AXM-WEB-PUSH web interface will only allow one admin to be logged in at a
time. If another user logs in at this access level, the previous user will be logged out.
The two different access levels are summarised below:
26
V: 2.0 Revised: Sept. 2018
www.accuenergy.com