Chapter 10 : Web Interface Readings And Parameter Settings; User Access Login - AccuEnergy Acuvim II Series User Manual

Acuvim II Series - AXM WEB PUSH
10. Web Interface Readings and Parameter Settings
The AXM-WEB-PUSH module supports the HTTPS protocol to allow for the use of a web inter-
face. The user will need to access the AXM-WEB-PUSH web interface to configure the module
and to further use its functions.
The web interface allows for remote initial setup of the Acuvim II meter. The AXM-WEB-PUSH
web interface allows for different user access levels.

10.1 User Access Login

Enter the correct IP address of the module in the search bar of the internet browser to access
the web interface of the AXM-WEB-PUSH.
NOTE: The recommend internet browser for the AXM-WEB-PUSH is either Google Chrome or
Firefox.
The user will be redirected to a login web page where users will have to enter in the Access
Level and enter appropriate password for that level.
The User access level is ideal for users who need only to take readings and view status from the
meter.
The default password for the User level is view.
It is recommended that no more than 5 users are logged in at the same time for this level to
ensure optimal performance of web interface.
The Admin access level is ideal for users who need access to configurations on the meter, the
web interface and to view readings.
The default password for the Admin level is admin .
The AXM-WEB-PUSH web interface will only allow one admin to be logged in at a time. If anoth-
er user logs in at this access level, the previous user will be logged out.
36
V: 1.36 Revised: June. 2020
www.accuenergy.com