Menus Of Expressbuilder - NEC Express5800 Maintenance Manual

Chapter 2 Convenient Features
4.2

Menus of EXPRESSBUILDER

You can operate EXPRESSBUILDER using onscreen menus.
(1)
Boot Selection Menu
When EXPRESSBUILDER starts from DVD or Internal Flash Memory, Boot Selection Menu shown below
appears.
OS installation *** default ***
Press the <Enter> key to select this menu. Or, if you did not perform any key operation, Home menu as shown
in ((2) Home Menu) appears 10 seconds later.
(2)
Home Menu
Operate Home Menu using the mouse or keyboard.
The following menus are included.
a) Setup
You can configure RAID array or install Windows or Linux easily. For details about how to install
Windows, see "Installation Guide (Windows)" or "Installation Guide (Linux)".
b) Utilities
Starts a utility stored in EXPRESSBUILDER.
For details about the provided utilities, see Chapter 2 (4.3 Utilities Provided by EXPRESSBUILDER).
c) Versions
Displays software and driver versions in EXPRESSBUILDER.
d) Exit
Select this menu to quit EXPRESSBUILDER.
Express5800/A1040b, A2040b, A2020b, A2010b Maintenance Guide
98
4. Details of EXPRESSBUILDER