Installing An Rru Power Cable - Huawei DBS3900 Installation Manual

RRU3249
Installation Guide
Figure 7-25 Installing a CPRI optical cable
To avoid any damage to optical cables, the cables connected to the RRU must be installed
according to the installation process. For details about the installation process, see
RRU
Step 3 Connect the end labeled 2A and 2B of the optical cable to the optical module on the BBU side.
Step 4 Route the cables according to the instructions in Cabling Requirements, and then use cable ties
to bind the cables.
Step 5 Label the installed cables according to the instructions in Attaching an L-Shaped Label.
----End

7.11 Installing an RRU Power Cable

This section describes the procedure for installing an RRU power cable.
Issue DraftA (2015-05-30)
NOTICE
Cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing RRU Cables
7.3 Installing
56