Product Features; Wlan Features - Huawei R230D Product Description

R230D&R240D
Product Description

3.1 WLAN Features

WLAN features supported by the AP are as follows:





















Issue 02 (2015-10-31)
Comply with IEEE 802.11a/b/g/n/ac
The maximum rate of 1.16Gbit/s
Maximum ratio combining (MRC)
Space time block code (STBC)
Beamforming
Low-density parity-check (LDPC)
Maximum-likelihood detection (MLD)
Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
802.11 dynamic frequency selection (DFS)
Short GI in 20 MHz, 40 MHz and 80 MHz modes
Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to
implement priority-based data processing and forwarding
Automatic and manual rate adjustment
WLAN channel management and channel rate adjustment
For details about WLAN channel management, see the Country Code & Channel Compliance Table.
Automatic channel scanning and interference avoidance
Service set identifier (SSID) hiding
Signal sustain technology (SST)
Unscheduled automatic power save delivery (U-APSD)
Control and Provisioning of Wireless Access Points (CAPWAP)
Automatic login
Extended Service Set (ESS)
Multi-user CAC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3

Product Features

3 Product Features
12