Single Point Status (Sps) - ABB COM600 Station Automation Series User Manual

1MRS756566
3.4.7.4.
COM600 Station Automation Series
User's Guide
Property/Para- Value or Value range/ Default
meter
Item Tag Path Default: None

Single point status (SPS)

Table 3.4.7.4-1 Configurable SPS (for OPC internal data) properties for OPC servers
Property/Para- Value or Value range/ Default
meter
Basic
Common Data SPS
Class
Addresses
Item Tag Path
LAN/WAN Master
Description
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below, it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED);
e.g. Attributes\Diagnostic counters\Trans-
mitted data messages. When the whole
path is used, it must be preceded by a
slash (/) character, e.g. /Channel
Name\Attributes\Diagnostic counters\Trans-
mitted data messages
Description
Common data class according to IEC
61850
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below, it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED);
e.g. Attributes\Diagnostic counters\Trans-
mitted data messages. When the whole
path is used, it must be preceded by a
slash (/) character, e.g. /Channel
Name\Attributes\Diagnostic counters\Trans-
mitted data messages
DNP 3.0
(OPC) 3.2
29