Siemens HIPATH HIPATH 1190 User Manual page 74

Functions used for Receiving Calls
Step by step
>
LOG ON?
>
LOG OFF?
* or
4 0 1
GP L OGON/GP L OGOFF
GP L OGON/GP L OGOFF
790 X (Name)
790 (Name)
NEXT?
>
LOG ON?
>
LOG OFF?
74
In the event that the extension belongs to more
than one Group
:
Select and press to confirm.
or
:
or
Enter the code to login or logout of the UCD group.
# 4 0 1
or
Press the "UCD GP LOGON/LOGOF" key.
or
If an X appears next to the group number (e.g., 790) it
means that the ringing signal for this group is enabled.
If a name has been stored for this group, it will be dis-
played (if configured by the system's Support Techni-
cian).
or
If an X does not appear, it means that the ringing signal
is disabled.
or
Enter the UCD group number.
• 7
:
Press to confirm. The next number in the group will be
displayed.
or
:
Select and press to confirm.
The ringing signal for the group displayed is enabled.
or
:
Select and press to confirm.
The ringing signal for the displayed group is disabled.
or
9 0 to 7 9 9 = UCD Group