Explanation of symbols Symbol Explanation If you are using an MF analog telephone, press the Flash key. Enter numbers, keys, password, internal or external numbers, etc. Signaling with a short beep Lift the handset. Start conversation Replace the handset Numbering Plan Description HiPath 1120 HiPath 1150...
External line reservation 1Wait for Busy Phone rings. external 2)Wait for ( Phone rings. external Functions used when making calls Feature Code n qk ddd . fhm System speed dialing n qk qd . qh Individual speed dialing n qmf qd .
Carrier n qhe Using a temporary MSN to make a MSN slot or MSN number Call external line external number Functions used during calls Feature Code n qjd Account code acc. code number Conference Consultation (To end a consultation wait for replace- ment of handset) Parking n rij...
n ree Call forwarding Deactivation n qeh Call forward no answer or busy extension, Voice mail group, Activation Call group or external line n reh Call forward no answer or busy Deactivation n qmk Do not disturb Activation n rmk Do not disturb Deactivation EVM:...
Music on Hold Music Activation n rmhed Music on Hold Deactivation n qmmf Remote configuration HiPath 1100 Manager Remote configuration 1) The local programming extension is talking to the remote Using an MF telephone programmer: qmme The remote programmer must provide: password programming codes.
n qhjh Alarm clock date/time (e.g., 24121830) (For a specified date and time) n rhj Alarm clock Deactivation UCD subscriber group functions Feature Code n qhdf Agent available n rhdf Agent unavailable n kmd.kmm Calling a UCD subscriber group n qhde Logging into a UCD subscriber group group(if it belongs to more than one group)
Page 8
Group call pickup is done with sequence "*0" instead of "*57" d) Recovery of a parked call is done with sequence "*57" instead of "*0"; Note 2: Feature Codes can be changed with the HiPath 1100 Manager. An expert should be consulted in this case.
Page 9
Subject to availability. Right of modification re- in the terms of the contract. served. All trademarks are the property of Siemens Enterprise Communications GmbH & Co. KG 26.01.2007 V6.0 or their respective owners.