What You Need To Get Started - National Instruments IMAQ PCI-1408 Getting Started

Chapter 1 Introduction

What You Need to Get Started

PCI-1408/NI-IMAQ for Mac OS
Detailed specifications of the PCI-1408 are in Appendix A,
Specifications.
To set up and use your PCI-1408, you will need the following:
PCI-1408
NI-IMAQ for Mac OS Release Notes
Getting Started with Your IMAQ PCI-1408 and the NI-IMAQ
Software for Mac OS
NI-IMAQ for Mac OS and online documentation
Optional software packages and documentation:
– LabVIEW
– IMAQ Vision for G
IMAQ BNC-1 shielded, 75 Ω BNC cable for VIDEO0 (included with
the PCI-1408)
IMAQ A2504-1 video cable (optional—for trigger and additional
camera support)
IMAQ A2514-1 video cable (optional—for complete trigger,
additional camera, and external synchronization support)
BNC-to-RCA adapter (included with the PCI-1408)
Your PowerPC-based PCI computer running Mac OS version 7.0 or
later
A video camera or other video source
1-2 © National Instruments Corporation