Ethernet Sockets For Voip - NEC SL2100 Quick Install Manual

Connect the Exchange Lines

Ethernet sockets for VOIP

There are two Ethernet sockets available with the SL2100: CPU card and optional VOIPDB card.
The IP Address of either socket use the same setup for VOIP settings.
Only CPU card installed

When the CPU card is installed – Use the Ethernet socket of the CPU.
8 VOIP resources built in with the CPU card are available
Use the VOIP IP address settings for VOIP devices
Note – do not use the CPU IP address settings as these will not support VOIP devices
CPU card
Ethernet socket
Use the IP address and Subnet mask setup in PCPro Easy Edit - Quick Install + Cards + CPU Settings + CPU
IP Address
CPU card with VOIPDB daughter card installed

When the optional VOIPDB card is installed – Use the Ethernet socket of the VOIPDB card
16~128 VOIP resources provided by the VOIPDB card + VOIP channel licenses are available
Use the VOIP IP address settings for VOIP devices
VOIPDB card
Ethernet socket
Use the IP address and Subnet mask setup in PCPro Easy Edit - Quick Install + Cards + CPU Settings + CPU
IP Address
Quick Install Guide – SL2100 SLNet rev1.0
SL2100 IP address 172.16.0.10
Subnet Mask 255.255.0.0
Supports Data (eg PCPro/WebPro, SMDR etc)
VOIP
LAN speed 100 Mbps Full Duplex
SL2100 IP address 172.16.0.10
Subnet Mask 255.255.0.0
Supports Data (eg PCPro/WebPro, SMDR etc)
VOIP
LAN speed 100/1000 Mbps Full Duplex
15