ISSUE 5.0
S
4 INSTALLING THE OPTIONAL INTERFACE CARDS
ECTION
4.1 VoIP Card (VOIPDB-C1)
4.1.1 General
The IP4WW-VOIPDB-C1 daughter board is used to convert the RTP (Real Time Transfer Protocol)
packets via the IP Network and PCM highway. The daughter board is installed on the CPU card.
4.1.2 Unpacking
Items
IP4WW-VOIPDB-C1
4.1.3 Installing the VOIPDB-C1 PCB
• Do not remove or install the CPU Card with the power on.
• If Expansion KSU(s) are installed, turn the power on/off in the order of
Expansion 3 KSU (V3.5 or higher), Expansion 2 KSU, Expansion 1 KSU
and then Main KSU.
• When the VOIPDB-C1 is installed on the CPU-B1, the NIC card on the
CPU does not function anymore.
1.
Turn off the system power and disconnect AC cord.
2.
Open and remove the Sub-Cover.
Hardware Manual
Table 2-18 VOIPDB-C1 Packing List
List of Contents
IP4WW-VOIPDB-C1
Ferrite Core (for Ethernet Cable)
Sub-Cover
Figure 2-80 Removing the Sub-Cover
Sub-Cover
Tab
SL1100
QTY
1
1
Tab
2-59