Table of Contents
Advertisement
Quick Links
1
Start
NOTE: Please ask your
reseller for the printer
driver software.
Remove tape and packing materials
a
Remove tapes
b
Remove tapes and foam
foam
c
Remove cardboard
squeeze latches to open clamshell
pull tabs
cardboard
2
Connect power
b
a
c
Advertisement
Table of Contents
Related Manuals for VIPColor VP700
Summary of Contents for VIPColor VP700
- Page 1 Start Connect power Remove tape and packing materials Remove cardboard Remove tapes squeeze latches to open clamshell Remove tapes and foam pull tabs cardboard foam NOTE: Please ask your reseller for the printer driver software.
- Page 2 Install ink cartridges Install printhead Choose display language Open printhead latch fully After connecting power for the first time, press Config to set the display language for the control panel. Missing Printhead Remove caps LANGUAGE 1. English Missing Printhead Remove printhead from packaging (Config) For other languages, press , ink couplings CONFIGURATION 3. PRINTHEAD (Select) LANGUAGE 1. English PRINTHEAD 2. REPLACE NOTE: Keep the orange cover. You will need it to cap the printhead if it is Wait for printhead latch to be (Return) removed from the printer. released.
- Page 3 Load media Do not touch the ink couplings, electrical contacts, or nozzles. electrical contacts Insert media till it stops. Wait for printer to load media. Push media roll against inner guide. No less than 45° nozzles Flat side against media roll Check that ink is flowing through the tubes on both sides of the printhead. Tighten knob fully...
- Page 4 Print test label Install printer driver To connect printer to network Load 4” x 4” or larger labels (with inter‐label gap or continuous). If using To connect printer to computer DHCP is enabled by default. If it is not available, continuous stock, set Media Layout to Continuous in the EWS Diagnostics page. see “Additional Networking Information”. VP7xx Network Printer Online Network CONFIGURATION 2. MAINTENANCE (Select) (Config) MAINTENANCE 1. PRINT TEST PAGE PRINT TEST PAGE 2. PQ PLOT Sample PQ plot Connect USB cable when prompted VP7xx Computer Verify the following on the PQ plot: • Lines are printed in the order yellow, black, cyan, black and magenta. • Lines are clearly defined with no white dots or streaks. • Vertical dashed lines are straight. •...
Need help?
Do you have a question about the VP700 and is the answer not in the manual?
Questions and answers