Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Void Cyclone Series
Summary of Contents for Void Cyclone Series
- Page 1 Cyclone Series User Guide V1.0...
- Page 2 This user guide is subject to change without notice. For the latest online version, visit: www.voidacoustics.com Void Acoustics and the Void logo are registered trademarks of Void Acoustics Research Ltd. in the United Kingdom, USA and other countries; all other Void trademarks are the property of Void Acoustics...
-
Page 3: Table Of Contents
Cable considerations for fixed installations Phoenix connector Cyclone 10 wiring diagram Cyclone 55 wiring diagram Cyclone Bass wiring diagram Bias V3/V9 speakON wiring Bias VQ speakON wiring Bias D1/Q2 Phoenix wiring 6.10 Bias Q5 speakON wiring Cyclone Series User Guide V1.0 Page 3... -
Page 4: Safety And Regulations
Void Acoustics Research Ltd for 1.2 Limitations reprocessing. For more information about where you can send your waste equipment for recycling, please contact Void Acoustics Research Ltd or one of your local distributors. -
Page 5: Limited Warranty
Cyclone Series product (provided it was purchased make the defective or malfunctioning product at an Authorised Void Dealer) that it is free of available to Void free and clear of all liens or other defects in materials and workmanship and that each restrictions. -
Page 6: Unpacking And Checking
If you need to place the loudspeaker on a flat surface ensure you use a lint free product to protect the finish • When you have removed the Cyclone Series loudspeaker from the packaging inspect it to ensure there is no damage and keep all original packaging in case it needs to be returned for any reason. -
Page 7: About
In buying this product, you are now part of the Void family and we hope using it brings you years of satisfaction. This guide will help you both use this product safely and ensure it performs to its full capability. -
Page 8: Specifications And Dimensions
14.5 kg (32 lbs) Enclosure Fibreglass Rigging Optional Easy Hang XL wall bracket Finish Smooth cellulose Measured in half space AES2 - 1984 compliant Calculated Figure 5.1: Horizontal directivity isobars Figure 5.2: Vertical directivity isobars Cyclone Series User Guide V1.0 Page 8... -
Page 9: Cyclone 10 Dimensions
5 Specifications and dimensions 5.1.3 Cyclone 10 dimensions (3.2”) 4-M8 320 (12.6”) 230 (9.1”) 320 (12.6”) 320 (12.6”) Figure 5.3: Dimensions Cyclone Series User Guide V1.0 Page 9... -
Page 10: Key Features
3.2 kg (7.1 lbs) Enclosure Fibreglass Rigging Included Easy Hang wall bracket Finish Smooth cellulose Measured in half space AES2 - 1984 compliant Calculated Figure 5.4: Horizontal directivity isobars Figure 5.5: Vertical directivity isobars Cyclone Series User Guide V1.0 Page 10... -
Page 11: Cyclone 55 Dimensions
5 Specifications and dimensions 5.2.3 Cyclone 55 dimensions 309 (12.2”) 2-M6 309 (12.2”) 309 (12.2”) 207 (8.1”) 309 (12.2”) Figure 5.6: Dimensions Cyclone Series User Guide V1.0 Page 11... -
Page 12: Cyclone Bass
Phoenix connectors with link out Height 370 mm (14.6”) Width 490 mm (19.3”) Depth 455 mm (17.9”) Weight 33.5 kg (73.9 lbs) Enclosure Fibreglass Finish Smooth cellulose Measured in half space AES2 - 1984 compliant Calculated Cyclone Series User Guide V1.0 Page 12... -
Page 13: Cyclone Bass Dimensions
5 Specifications and dimensions 5.3.3 Cyclone Bass dimensions 490 (19.3”) 490 (19.3”) 455 (17.9”) 490 (19.3”) 490 (19.3”) Figure 5.7: Dimensions Cyclone Series User Guide V1.0 Page 13... -
Page 14: Cabling And Wiring
15 m 6.3 Phoenix connector Figure 6.1 shows the rear panel of a Cyclone Series loudspeaker with the polarity of the Phoenix connector labelled. When viewed from the rear the connectors are negative to the left and positive to the right. -
Page 15: Cyclone 10 Wiring Diagram
HF (1”) and LF (10”) Link/out 6.5 Cyclone 55 wiring diagram 1” HF Passive Crossover 1” HF 5” LF 5” LF Figure 6.3: Wiring diagram Phoenix pins 1-/1+ Phoenix pins 2-/2+ HF (1”) and LF (10”) Link/out Cyclone Series User Guide V1.0 Page 15... -
Page 16: Cyclone Bass Wiring Diagram
LF (2 x 5”) and HF (2 x 1”) Cyclone Bass LF (12”) 4 (2 Ω load to amplifier) Max quantity per channel Cyclone 10 8 (2 Ω load to amplifier) Cyclone 55 4 (2 Ω load to amplifier) Cyclone Bass Cyclone Series User Guide V1.0 Page 16... -
Page 17: Bias Vq Speakon
LF (2 x 5”) and HF (2 x 1”) Cyclone Bass LF (12”) 4 (2 Ω load to amplifier) Max quantity per channel Cyclone 10 8 (2 Ω load to amplifier) Cyclone 55 4 (2 Ω load to amplifier) Cyclone Bass Cyclone Series User Guide V1.0 Page 17... -
Page 18: Bias Q5 Speakon
LF (2 x 5”) and HF (2 x 1”) Cyclone Bass LF (12”) 4 (2 Ω load to amplifier) Max quantity per channel Cyclone 10 8 (2 Ω load to amplifier) Cyclone 55 4 (2 Ω load to amplifier) Cyclone Bass Cyclone Series User Guide V1.0 Page 18... -
Page 19: System Design
7 System design 7.1 System design principles Cyclone Series loudspeakers can be arrayed as a single pair facing forward to provide a wide stereo image. Figure 7.1: Cyclone 10 single pair arrangement For applications requiring wide horizontal coverage, use two Cyclone 10 in pairs, angled at about 40°... -
Page 20: Loudspeaker Placement And
7.6. The applied aiming reduces unwanted reflections from the ceiling and directs the highest energy concentration to the audience area requiring it most. This is the most desirable position for the loudspeakers in this example. Figure 7.6: Correct loudspeaker placement Cyclone Series User Guide V1.0 Page 20... -
Page 21: Positioning
This will help provide a wider coverage and result in more of the power being used usefully. Audience Stage Figure 7.8: Correct horizontal dispersion Cyclone Series User Guide V1.0 Page 21... -
Page 22: Positioning
The shallow angle of attack will also induce refraction issues on a hot dance floor, leading to reduced HF penetration at mid and far distances, again reducing intelligibility and coherence. Figure 7.11: Incorrect loudspeaker placement Cyclone Series User Guide V1.0 Page 22... -
Page 23: Bass Alignment - Delay Times
E to the north edge of the circle, and multiply by the delay time per metre. Or: (A - D) x 2.9 ms/m = delay time. Figure 7.14: Bass alignment example 2 Cyclone Series User Guide V1.0 Page 23... -
Page 24: Mounting
Do not use a telephone (even if hands-free) while rigging. Always concentrate fully on the rigging operation • Do not rig equipment that is worn, damaged, corroded, mishandled or over-stressed in any way • Use only Void-approved mounting equipment and accessories Cyclone Series User Guide V1.0 Page 24... -
Page 25: Cyclone 10 Wall Mounting
Figure 8.3: Deconstructing the bracket assembly Cyclone Series User Guide V1.0 Page 25... - Page 26 (figure 8.6a) and in the vertical axis by adjusting the bolt on the base of the assembly (figure 8.6b). Figure 8.6a: Bracket adjustment Figure 8.6b: Bracket adjustment Cyclone Series User Guide V1.0 Page 26...
-
Page 27: Cyclone 10 Ceiling Mounting
Figure 8.9: Fixing bracket Cyclone Series User Guide V1.0 Page 27... - Page 28 Figure 8.10: Attaching bracket to loudspeaker Step 4: Tighten the bolt on the bracket to fix the loudspeaker in position. Figure 8.11: Loudspeaker positioning Cyclone Series User Guide V1.0 Page 28...
-
Page 29: Cyclone 55 Wall/Ceiling Mounting
Figure 8.14: Fixing bracket Cyclone Series User Guide V1.0 Page 29... - Page 30 Figure 8.15: Attaching bracket to loudspeaker Step 4: Tighten the bolt on the bracket to fix the loudspeaker in position. Figure 8.16: Loudspeaker positioning Cyclone Series User Guide V1.0 Page 30...
-
Page 31: Horn Rotation For Mounting In
Figure 8.18: Grill removal Step 3: With the grill removed undo all four screws from the horn. Figure 8.19: Removing horn screws Cyclone Series User Guide V1.0 Page 31... -
Page 32: Landscape Mode
Pull the cable ties toward the opposite edge of the loudspeaker and then lower the grill into position. Figure 8.21: Refitting the grill Step 5: Remove the cable ties. Figure 8.22: Removing cable ties Cyclone Series User Guide V1.0 Page 32... -
Page 33: Service
Before returning your faulty product for repair, please remember to get an R.A.N. (Return Authorisation Number) from the Void dealer who supplied the system to you. Your dealer will handle the necessary paperwork and repair. Failure to go through this return authorisation procedure could delay the repair of your product. -
Page 34: Appendix
(H) 493 mm x (W) 320 mm x (D) 230 mm (19.4” x 12.6” x 9.1”). Weight shall be 14.5 kg (32 lbs). The loudspeaker system shall be a Void Acoustics Cyclone 10. Cyclone Series User Guide V1.0 Page 34... - Page 35 (H) 192 mm x (W) 309 mm x (D) 207 mm (7.6” x 12.2” x 8.1”). Weight shall be 3.2 kg (7.1 lbs). The loudspeaker shall be the Void Acoustics Cyclone 55. Cyclone Series User Guide V1.0 Page 35...
- Page 36 RAL colour. External dimensions shall be (H) 370 mm x (W) 490 mm x (D) 455 mm (14.6” x 19.3” x 17.9”). Weight shall be 33.5 kg (73.9 lbs). The loudspeaker system shall be a Void Acoustics Cyclone Bass. Cyclone Series User Guide V1.0...
- Page 40 North America Void Acoustics North America 503-854-7134 sales.usa@voidacoustics.com Head Office Void Acoustics Research Ltd Unit 15 Dawkins Road Industrial Estate Poole Dorset BH15 4JY England +44 (0) 1202 666 006 info@voidacoustics.com Registered in England & Wales No. 07533536 www.voidacoustics.com...
Need help?
Do you have a question about the Cyclone Series and is the answer not in the manual?
Questions and answers