Appearance; Pairing And Connection; Power Button; Bluetooth Pairing Button - Huawei CM51 Quick Start Manuals

Appearance

Power button

Press and hold the power button for approximately 2 seconds to power your speaker on or off.
If your speaker is idle, and has no audio output for more than 20 minutes, it will power off automatically.

Bluetooth pairing button

While your speaker is on, press and hold the Bluetooth pairing button for 1 to 2 seconds to enter Pairing mode.
While your speaker is on, press and hold the Bluetooth pairing button for over 6 seconds to clear the pairing history,
which will be accompanied by a "beep" sound.
Microphone
Sound reception.
Volume up button
Press the volume up button to increase volume. Press and hold the volume up button to switch to the next song.
Function button
Press the function button to answer an incoming call. Press and hold the function button to reject.
During an ongoing call, press the function button to hang up. Press and hold the function button to switch the call
between your speaker and phone.
During music playback, press the function button to pause/play the music.
Volume down button
Press the volume down button to decrease volume. Press and hold the volume down button to return to the
previous song.
Indicator
Charging port and reset button
Using the USB charging cable, connect your speaker to a charger (with an output voltage of 5 V) or to a
computer's USB port.
Press and hold the reset button for 2 seconds to reset the hardware and shut down the device.

Pairing and connection

1

English