Motor Cabling; Rating Table For Acs800-04 Drives With A Sine Filter - ABB ACS800 User Manual

The overpressure disconnector can extend the capacitor by 8 mm. Therefore
sufficient space must be left above the terminals when mounting the capacitors.
The capacitors are connected in delta. In NSIN1380-6, two capacitors are connected
in parallel. The minimum cross-sectional area of capacitor wiring is as follows:
NSIN0210-6, NSIN0315-6, NSIN0485-6
See the chapter
The filters are cooled by a fan; the airflow must be directed through the choke unit,
and recirculation prevented e.g. with an air baffle. It must be made sure that there is
enough cooling air available and that the hot air can freely escape the filter
enclosure or cubicle.
The cooling fan must be provided with a 230 V AC supply.

Motor cabling

For frames R2 to R6, the length of the cable between the drive and the filter is not
restricted. For frames R7 and R8, the maximum length is 5 metres; if the required
length exceeds 5 metres, du/dt filters must be used at the drive output.
The cable length between the filter and the motor is not restricted. All other cabling
requirements for the ACS800 also apply to the filters. See the Hardware Manual of
the drive.

Rating table for ACS800-04 drives with a sine filter

Drive type
Frame Filter type
ACS800-04-...
Three-phase supply voltage 380 V, 400 V or 415 V
0005-3 R2 NSIN0006-5
0011-3 R3 NSIN0016-5
0016-3 R3 NSIN0020-5
0020-3 R3 NSIN0025-5
0023-3 R3 NSIN0030-5
0025-3 R4 NSIN0030-5
0030-3 R4 NSIN0040-5
0035-3 R4 NSIN0040-5
0040-3 R5 NSIN0050-5
0050-3 R5 NSIN0060-5
0060-3 R5 NSIN0070-5
0075-3 R5 NSIN0100-5
0070-3 R6 NSIN0100-5
0100-3 R6 NSIN0120-5
0120-3 R6 NSIN0140-5
0135-3 R6 NSIN0315-6
0205-3 R6 NSIN0315-6
0140-3 R7 NSIN0315-6
0170-3 R7 NSIN0315-6
Notes:
*Combined value for drive and filter.
**Estimated for a cabinet that can house the filter.
***Estimated combined weight of cabinet and filter.
Filter type
NSIN0900-6, NSIN1380-6
Illustrations
*Heat dis-
I P
sipation
cont.max cont.max
A kW W
8.5 3 180
19 7.5 350
25 11 450
33 15 560
39 18.5 630
44 22 630
54 26 730
58 28 730
72 35 950
86 42 1100
102 52 1500
125 63 1800
141 71 1800
164 84 2200
199 102 2700
220 110 3900
260 130 5500
206 100 4100
248 120 4900
Wire size
2
(mm )
35
50
for cabinet assembly examples.
Air flow
*Noise
level
Drive Filter Total
3 3 3
m /h m /h m /h dBA
35 – 35 67
69 – 69 68
69 – 69 68
69 – 69 68
69 – 69 69
103 – 103 69
103 – 103 69
103 – 103 69
250 – 250 73
250 – 250 73
250 – 250 73
250 – 250 75
405 – 405 75
405 – 405 75
405 – 405 75
405 700 1105 79
405 700 1105 79
540 700 1240 79
540 700 1240 79
Degree of
Height Width
protection
IPxx mm mm
IP00/IP23 160/234 155/230 120/170
IP00/IP23 280/460 240/470 190/270
IP00/IP23 280/460 240/470 200/270
IP00/IP23 280/460 240/470 210/270
IP00/IP23 280/460 240/470 220/270
IP00/IP23 280/460 240/470 220/270
IP00/IP23 315/460 300/470 228/270
IP00/IP23 315/460 300/470 228/270
IP00/IP23 315/510 300/580 240/325
IP00/IP23 320/510 300/580 270/325
IP00/IP23 415/510 360/580 210/325
IP00/IP23 415/620 360/700 225/425
IP00/IP23 415/620 360/700 225/425
IP00/IP23 415/620 360/700 240/425
IP00/IP23 450/620 400/700 500/525 120/165
IP00 2060 400
IP00 2060 400
IP00 **2060 **400
IP00 **2060 **400
Sine filters with ACS800 drives
21
Depth Weight
mm kg
6/9
15/26
19/30
21/32
26/37
26/37
34/45
34/45
37/53
53/69
66/82
69/99
69/99
75/105
600 230
600 230
**600 ***230
**600 ***230