Panasonic AK-HRP200G Operating Instructions Manual page 29

Parts and their functions (when operating a camera recorder)
22.
DATA SET button <UP>
Use this button to increase the set value when ND/CC filter, M.GAIN,
SHUTTER, or VFR is displayed. Each press of the button increases
the selection value.
This button is also used as an operation button in the ZOOM/FOCUS/
AUTO FOCUS setting mode.
On: Enabled
Off: Disabled.
<Note>
Simultaneously pressing the DATA SET button <UP>, DATA SET
button <DOWN>, and Scene/User File selector button <SHIFT> for
about 2 seconds switches to setup mode.
ND filter, CC filter, ZOOM, FOCUS, AUTO FOCUS, and VFR are not
supported by all models.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
23.
DATA SET button <DOWN>
Use this button to decrease the set value when ND/CC filter, M.GAIN,
SHUTTER, or VFR is displayed. Each press of the button decreases
the selection value.
This button is also used as an operation button in the ZOOM/FOCUS/
AUTO FOCUS setting mode.
On: Enabled
Off: Disabled.
<Note>
Simultaneously pressing the DATA SET button <UP>, DATA SET
button <DOWN>, and Scene/User File selector button <SHIFT> for
about 2 seconds switches to setup mode.
ND filter, CC filter, ZOOM, FOCUS, AUTO FOCUS, and VFR are not
supported by all models.
For details on setup mode, refer to Operations and Settings on the
supplied CD-ROM.
30 27 28 33 34 31
UP CAMERA
ND CC SHT SYNC
22
M.GAIN M.PED
24
DATA
SET
23
IRIS
DOWN DISPLAY SELECT
SET UP ND/CC M.GAIN/M.PED SHUTTER
SHIFT
+
UP+DOWN SAVE/LOAD EXIT EXECUTE
26 29 32
24.
Setting display (4 digits)
This display indicates settings.
The IRIS value is displayed when the power is turned on. Pressing
one of the display select buttons displays the selected setting. The
display state of each item and the standard position are shown.
ND
CC
M.GAIN
M.PED
IRIS
SHUTTER
ZOOM
FOCUS
AUTO
FOCUS
VFR
*
1
<Note>
ND filter, CC filter, ZOOM, FOCUS, AUTO FOCUS, and VFR are not
supported by all models.
25.
IRIS display <IRIS>
This display is lit green when an IRIS setting is displayed on the
setting display.
The IRIS value is displayed when the power is turned on.
Also, when the Iris lever is operated while something other than IRIS
is displayed on the setting display, the IRIS value will be displayed for
about 2 seconds.
(continued)
35
10-19
36
25
No.
SELECT
37
Item Display
■_ _ _
_ ■ _ _
■■dB
"iSo" is displayed when ISO is selected.
■■■■
_ ■■■
■■■■
Zo Adjusted settings are not displayed.
Fo Adjusted settings are not displayed.
AF
■■■P "FroF" is displayed during VFR OFF.
During item adjustment, the display lights green when the setting
returns to the standard position.
With settings other than the standard position, the display lights
yellow.
Standard position
1
*
1
A
*
1
0 dB
* 1
16
*
1
_ _ _ _
_ _ _ _
ON(AF. on)
OFF(AF. of)
29