Sharp UX-A1000 Operation Manual page 98

Polling (Requesting a Fax Transmission)
Requesting transmission
1
Dial the fax machine you want to poll using one of the following
methods:
•
Pick up the handset (or press
the fax answerback tone.
•
Pick up the handset (or press
fax answerback tone.
•
Press
•
Enter the full number using the numeric keys.
16/POLL
2
Press
•
If you used the handset, replace it when POLLING appears in the display.
Reception will begin.
Being polled (polling standby)
To let another fax machine poll your machine, press
reception mode to FAX and load the document(s).
Transmission will take place when the other fax machine calls your machine
and activates polling. Automatic reception is possible while your machine is
on polling standby.
96
and enter a 2-digit Speed Dial number.
SPEED DIAL
.
) and dial the full number. Wait for
SPEAKER
) and press a Rapid Key. Wait for the
SPEAKER
to set the
RESOLUTION/
RECEPTION MODE