Sharp UX-A1000 Operation Manual page 45

Recording the transfer message
The transfer message plays when you answer the telephone, and informs you
that the call is a transfer call. It can be up to 15 seconds long. To record a
transfer message, follow the steps below. The following is an example:
"Hello. This is a transfer call for (YOUR NAME). Enter your remote code
number now."
1
REC/MEMO
Press
2
Press once.
3
Lift the handset.
(If you have already recorded a
message, you can press
listen to the message, or press
to delete the message.)
START/
4
MEMORY
Press
•
The transfer message can be up to 15 seconds long. While recording, the
display will show the time left to record.
5
When finished, replace the handset or press
once and twice.
PLAY
to
DELETE
and speak into the handset to record the message.
Transfer Function
Display:
OGM2(TRANSFER)
.
STOP
43