Charge; Control - Beats SOLO3 Setup And User Manual

4/5/2017
2. Swipe to the side in Control Center to show the Now Playing card.
3. Tap the device name in the corner of the card, then choose your headphones from the list of
playback devices. If you don't see your headphones, follow the steps for all other devices,
below.
All other devices:
1. Go to Bluetooth settings on your device. On your Mac, you can just click the Bluetooth icon in
the menu bar.
2. Select your headphones from the list of Bluetooth devices. If you don't see your headphones
after a few seconds, press and hold the power button for 5 seconds.

Charge

Plug your headphones into a power source using the included micro USB cable. As the
headphones charge, the Fuel Gauge lights flash. When charging is complete, all five lights shine
for 30 seconds, then turn off.
Your headphones provide up to 40 hours of playback from 2 hours of charging, and up to 3 hours
of playback from a 5-minute charge.
To conserve battery or use your headphones when the battery is depleted, plug in the RemoteTalk
cable to use your headphones in wired mode.

Control

To control audio playback, use the b button on the left earcup, or the center button on the included
RemoteTalk cable.
Press once to play or pause audio playback.
Press twice to skip to the next track. Press three times to skip backward.
Press twice and hold on the second press to scan forward through a track. Press three times
and hold on the third press to scan backward through a track.
To control playback volume, use the volume buttons on the left earcup or the RemoteTalk cable. To
control call volume, use the volume controls on your phone.
Press and release the volume up (+) button, or press and hold to increase volume continuously.
Press and release volume down (-) button, or press and hold to decrease volume continuously.
To control phone calls, use the b button on the left earcup, or the center button on the RemoteTalk
cable.
Press once to answer or end a call.
https://www.beatsbydre.com/support/how­to/set­up­and­use­solo3­wireless
Set up and use your Solo3 Wireless Headphones
2/7