Table of Contents
Advertisement
Configuring Proxy Settings
2094532-001 D 02 2018
6.
Save and close the "application.properties" file.
This section is only applicable if the OUTBOUND network requires a
proxy server to connect to the internet. See "Facility information"for
proxy configuration information.
1.
Using WinSCP:
•
From the drop-down menu, select /<root>
•
Navigate to: /root/PredixMachine/etc
•
Right-click on the com.ge.dspmicro.httpclient.cfg and
Edit
select
.
The "com.ge.dspmicro.httpclient.cfg" file opens as shown in
the below screenshot.
2.
Enter the Proxy Host of the facility information to:
•
com.ge.dspmicro.httpclient.proxy.host=
3.
Enter the Proxy Port of the facility information to:
•
com.ge.dspmicro.httpclient.proxy.port=
4.
If the proxy configuration requires a user name and password:
•
Enter the Proxy Username to:
com.ge.dspmicro.httpclient.proxy.user=
•
Enter the Proxy Password to:
com.ge.dspmicro.httpclient.proxy.password=
Password>
5.
Save and close the "com.ge.dspmicro.httpclient.cfg" file.
The screen looks as follows before the proxy information is
added:
<Proxy Host>
<Proxy Port>
<Username>
<Proxy
13
Advertisement
Table of Contents
