Application Configuration - Nokia 7368 Product Manual

7368 ISAM ONT G-240W-G Product Guide
(2 of 2)
2
3
4
5
6
7
7.2.5
G-240W-G ONTs also supports application configuration, including:
•
•
•
•
•
•
•
Issue: 01
Release 05.08.01a | August 2018 | Edition 01
Field
Trusted Network Enable
ICMP, SSH, HTTP, TR-069
Trusted Network
Source IP Start
Source IP End
Select a WAN connection from the drop-down menu.
Click to enable or disable Trusted Network.
Select an access control level for each of the four protocols: ICMP, SSH, HTTP, and TR-069
for both the WAN and the LAN side.
Click Save.
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
STOP. This procedure is complete.

Application configuration

port forwarding
port triggering
DDNS
NTP
USB
UPnP and DLNA
voice setting
3FE-47555-AAAA-TCZZA
Description
Click the checkbox to enable or disable
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Configure a G-240W-G indoor ONT
127