ETSI ONT safety guidelines
2.2.3
The ONT equipment complies with the EN 300 019 European environmental
standards.
2.2.4
This device complies with CE RED radiation exposure limits set forth for an
uncontrolled environment. To comply with CE RED RF exposure compliance
requirements, this grant is applicable only for mobile configurations. The antennas
used for the transmitter must be installed to provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
2.2.5
For most ONTs, the ONT equipment complies with EN 60825-1 and IEC 60825-2 for
laser products. If there is an exception to this compliance regulation, you can find this
information in the standards compliance section of the unit data sheet in this Product
Guide.
2.2.6
The ONT equipment complies with the requirements of ITU Recommendation K.21
for resistibility of telecommunication equipment installed in customer premises to
over voltage and overcurrents.
2.2.7
The ONT equipment complies with EN 300 753 acoustic noise emission limit and test
methods.
20
Release 05.08.01a | August 2018 | Edition 01
Environmental standard compliance
CE RED RF Radiation Exposure Statement
Laser product standard compliance
Resistibility requirements compliance
Acoustic noise emission standard compliance
3FE-47555-AAAA-TCZZA
7368 ISAM ONT G-240W-G Product Guide
Issue: 01