Storing A Cuelist To A Master - Philips Strand Lighting Quick Start Manual

500ML Lighting Control Console
QuickStart Guide

Storing a Cuelist to a Master

After setting up a look, press the [Rec] key followed by the either a master's Play [] or Pause / Back Key [❚ ❚]. If
you store a cuelist that way, it will be stored in the next available slot in the Cuelist Pool and will be automatically
assigned to a master.
Note: While the Record Toolbar is shown the encoders may be used to set the Next, Fade and Snap Time prior to
recording the cue.
Play
Pause / Back
Master/Fader
Figure 45: Master / Fader
Note: You may label any item by pressing the [ASSIGN] button twice. The command line will read "Label". Now
select the item you would like to label and type in the name.
To store another cue into the same Cuelist, simply press the [REC] key again, followed by the Cuelist you would like
to add the cue to. If the Cuelist only contains one cue, a window (Figure 46) will pop up asking you what to do.
Select, Append As New Cue.
Figure 46: Create or Merge Cue? - Options Window
33
Cuelists