Philips Strand Lighting Quick Start Manual page 21

500ML Lighting Control Console
A library selection screen will appear
• If you would like to add a predefined Fixture Type, select on Factory Library.
• If you would like to add a User created or User modified fixture, select User Library. Click on Next when done.
After clicking Next for the Factory Library selection, a fixture selection screen as shown in FIG will appear allowing
you to select a predefined fixture.
• You may search for fixtures using the search field shown in the top part of the screen. In order to complete the
examples shown in this guide, search for "vari 3000" and select the Philips Vari-Lite VL3000 Spot from the list. To
clear your search, click the Reset Filter button. After selection, click on the Next button.
• Alternatively, you may select the fixture by using the Manufacturer, Type and Mode fields.
After selecting a fixture for your show, a new screen
selection. In this screen, you will be required to enter the following information:
• Fixture Count - The number of this type of fixture being added to the show.
(Figure
Figure 22: Select Library Screen - Library Choices to Add Fixtures
Search Field
Figure 23: Select Library - Fixture Search and Selection Screen
22) allowing you to select where to select and import fixtures.
(Figure 24 on page
QuickStart Guide
20) will appear confirming your fixture
Fixture Setup
19