RRU3931E
Installation Guide
Figure 1-29 Removing a waterproof cap
Step 2 Connect the Smart-type N male connector at one end of the RF jumper to the RF port on the
RRU3931E.
When installing an RF jumper, hold tightly the metal part (in the red dotted circle in
1-30) of the Smart-type N male connector and push the connector upwards. A slight crack
will be heard when the connector is properly installed. See
Figure 1-30 Installing an RF jumper
Do not exert force on the non-metal part, that is, the black part, as shown in
Issue Draft A (2016-03-30)
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 RRU3931E Installation Guide
Figure
1-30.
Figure 1-30
Figure
34