Sanyo AH-23541 Replacement Procedure page 3

Lens Replacement Procedure
Perform the steps 1-6 for lens replacement.
First set the lens at the lowest position with lens shift adjustment.
1
Remove the Lens Cover and the Top Cabinet
1. Turn the Lens Cover counter-clockwise and pull it
toward front to remove the Lens Cover.
2. Remove the two screws (SCREW "A") and remove
the Top Cabinet.
1. Pull Lens Cover toward front and remove it.
2. Remove the two screws (SCREW "A") and remove
the Top Cabinet.
2
Remove the Light-Block Sheet Base
Slide the Light-Block Sheet Base upward to remove it.
(For B type Cabinet)
TOP CABINET
TOP CABINET
LENS COVER
LIGHT-BLOCK
SHEET BASE
-3-
SCREW "A"
Fig-1-1
LENS COVER
SCREW "A"
Fig-1-2
Fig-2