Adey MagnaClean Micro 2 Installation And Servicing Instructions

Adey MagnaClean Micro 2 Installation And Servicing Instructions

Advertisement

Quick-release trigger

MagnaClean
Micro2 incorporates a secure, quick-release, trigger which
®
enables the filter to be removed and re-installed in seconds.
The industry leading connections are an integral part of the new MagnaClean
Micro2 design. They enable easy and speedy filter removal during annual
Servicing or to undertake a MagnaCleanse system flush. This also makes it ideal for
systems where there is little room to install a filter.
The following instructions are designed to support engineers in the safe and
effective servicing of MagnaClean Micro2 using the quick-release trigger.
1
2
Turn locking pin 90˚
and remove
4
5
Replace locking pin
and turn 90˚ to lock
Replace the collets,
quick-release trigger
and canister.
FOR BEST RESULTS
Install and service with MC1+, the advanced system inhibitor from
the UK's No 1 manufacturer of magnetic filters.
Maximum working pressure: 6 bar
3
Flow rate: <50 l/min
Valve A: Double depth socket, slip couplet
CAUTION:
MagnaClean filter contains a strong magnet. Keep away from all electrical
devices, bank cards and other magnetic devices.
N.B. Periodically remove collets
MagnaClean filter contains a strong magnet. Caution should be taken at all
and lubricate seals with water
times when handling if you have a pacemaker fitted.
MagnaClean filter is a pressurized device. Always release pressure
before servicing.
Unit may be hot in operation. Handle with care.
IMPORTANT Always follow the Standard Electrical Best Practice guidelines when installing a
MagnaClean filter. A copy of these can be found at http://www.hse.gov.uk/electricity
To maintain earth continuity in accordance with current IEE regulations, when required a
suitable earth bonding cable should be fitted to the pipework to bypass the product.
Refer to NICEIC 17th edition for more information
Maximum working temperature: 95°C
Flow: Bi-directional
Valve B: Single depth socket
Telephone: 01242 546717
Email: info@adey.com
www.adey.com
Produced from recycled material
A carbon neutral company
Micro
Installation and servicing
instructions
Micro

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MagnaClean Micro 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Adey MagnaClean Micro 2

  • Page 1 Refer to NICEIC 17th edition for more information FOR BEST RESULTS Install and service with MC1+, the advanced system inhibitor from Telephone: 01242 546717 Email: info@adey.com the UK’s No 1 manufacturer of magnetic filters. www.adey.com Produced from recycled material A carbon neutral company...
  • Page 2 The following instructions are designed to support In both diagrams, position A is ® magnetic filtration. ADEY’s filters protect more than three million central heating systems engineers in the safe and effective installation recommended as part of ADEY’s Best in UK homes removing virtually 100% of the damaging suspended black iron oxide...

Table of Contents