Input Source Selection (Computer 2: Rgb) - Sanyo PLC-WXU300K Owner's Manual

Computer Input
Input Source Selection (Computer : RGB)
Direct Operation
Choose Computer (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control

COMPUTER  can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼

then press the SELECT button.
When Computer  is selected, analog RGB input
3
source will be selected directly.
 Note:
When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.45).
8
COMPUTER  button
Computer (RGB)
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer  and
Top Control
INPUT button
Input Menu
Computer 1

Computer 
HDMI
Video
S-video