Video Input; Input Source Selection (Video, S-Video) - Sanyo PLC-WXU300K Owner's Manual

Video Input

Input Source Selection (Video, S-video)

Direct Operation
Choose Video or S-video by pressing the INPUT button on
the top control or the VIDEO button or the S-video button on
the remote control.
Before using INPUT button, correct input source should be
selected through menu operation as described below.
Remote Control

COMPUTER  can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
Use the Point
▲▼

S-video and then press the SELECT button.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-video
VIDEO jack, select S-video.
Note:
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
VIDEO button
Video
S-VIDEO button
S-video
buttons to select Input and
▲▼
the SELECT button.
► or
buttons to select either Video or
INPUT button
Top Control
Input Menu
Computer 1

Computer 
HDMI
Video
S-video
37