Connections To Other Equipments - Sanyo DVD-L70 Instruction Manual

CONNECTIONS TO OTHER EQUIPMENTS

Before Connecting
• Please also read the user's manual for any devices you wish to connect.
• When connecting, make sure to turn off the power to this unit and the device you are connecting, and unplug
the power plug from the AC outlet. Connecting while the power is on could cause damage to the speaker(s).
• Please make sure that the connecting plugs are securely inserted in each device. If not fully inserted, it may
cause noise.
Using an AV Amplifier with Built-in Digital Surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
When connecting to the following items, connections are made as in the following diagram. (This is one
example for connecting devices. Please refer to the amplifier's user's manual for details.)
• AV amplifier with built-in Dolby Digital decoder
• AV amplifier with built-in DTS decoder
Main Unit (Side)
Front Speaker
(Left)
Surround
Speaker
(Left)
* Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby
Laboratories, Inc. All rights reserved.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Notes:
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG
to ON on the AV Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your
ears or causing the speakers to be damaged.
• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
Optical digital cable (not supplied)
Optical Digital
Audio Output
Center
Speaker
-E51-
To Optical Digital Audio Input
AV Amplifier with built-in digital
surround decoder as listed above
Subwoofer
Front Speaker
(Right)
Surround Speaker
(Right)