Catv Connections - Sanyo DVD-L70 Instruction Manual

Portable lcd tv/dvd player

Hide thumbs Also See for DVD-L70:

Supplementary manual (1 page)

Table Of Contents

Table of Contents

This unit has an extended tuning range and can tune most cable channels without using a Cable TV Converter

box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling

these signals for normal viewing requires the use of a descrambler device which is generally provided by the

cable company.

For Subscribers to Basic Cable TV Service

Antenna Plug (supplied)

75 ohm

Coaxial Cable

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the

incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,

connect the output jack of the Converter/Descrambler box to the Antenna Plug (supplied) first, then connect the

Antenna Plug to the Antenna Jack on the unit. Follow the connections shown below. Tune the unit to the output

channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to

select channels.

Incoming

75 ohm

CATV Cable

For Subscribers to Unscrambled Basic Cable TV Service with Scrambled

Premium Channels

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require

the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available

from the Cable company or an electronics supply store). Follow the connections shown below. With the switch

in the "B" position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A"

position, tune your unit to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the

Converter/Descrambler box to tune scrambled channels.

Incoming

75 ohm

CATV Cable

Splitter