Parts Names; Front Panel - Sanyo MPX-CD4 Instruction Manual

PARTS NAMES

FRONT PANEL

1
POWER
This unit is not equipped with a power switch. The power is turned on/off when the supplied power cord is connected/disconnected at
the power source.
1
POWER indicator
2
Camera select buttons and camera indicators
Use these buttons to select the picture from the
corresponding camera. Also, when in 4 divisions split
screen, 4 divisions zoom, still image or sequential display
modes, press one of these buttons to return to the normal
picture full screen display of the corresponding camera.
3
MON2 button and indicator
Press this button to set the output at monitor 2.
4
STILL button and indicator
In 4 divisions split screen, 4 divisions zoom or full screen
display modes, press this button to freeze the displayed
image. Press the button one more time to cancel.
5
ZOOM button and indicator
In 4 divisions split screen or full screen display modes,
press this button for a 2x zoomed in image. Press the
button one more time to cancel.
6
SEQUENCE button and indicator
In 4 divisions split screen or full screen display modes,
press this button for an automatic sequential full screen
display of the pictures.
7
QUAD button and indicator
In full screen display or sequential display modes, press this
button to switch to 4 division display mode. The default
display mode is 4 division display mode.
English
2
1 2 3
3 4 5 6 7 8 9 F
4
MON 2 STILL ZOOM SEQUENCE
SHIFT EXIT NEXT
8
LIVE button and indicator
Press this button to select the live input mode.
9
VCR button and indicator
Press this button to select the VCR playback input mode.
F
MENU button
Press this button to display the menus. Press repeatedly to
select the different menus in order. Buttons 3 to 9 are
used for menu control (for more information, please refer to
page 7).
G
ALL RESET button
H
MENU RESET button (see page 8)
3
G
QUAD LIVE VCR MENU ALL RESET
MENU RESET
H