Sensor Setting - Sanyo MPX-CD4 Instruction Manual

SENSOR SETTING

You can set an area of the screen to be used as a sensor. You can also set the recording mode (ACTIVE REC) for sensor recording,
when the sensor sends a trigger as it detects a movement.
(SENSOR SET)
Setting the ACTIVE REC Mode
1
Press the MENU button 5 times to display the (SENSOR
SET) menu.
2
Press the l button to highlight the setting to modify.
3
Using the + (or –) button, select the desired setting,
then press the l button.
•
Repeat step 3, until all the settings are as desired.
4
Press the NEXT button to go to the POSITION/LEVEL
SET sub-menu,
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
2
(SENSOR SET)
ACTIVE REC MODE2
DURATION 05 S
POSITION/LEVEL SET
PRESS NEXT
LIVE
SENSOR SET menu
ACTIVE REC
MODE1: The live pictures from the camera corresponding to the
alarm trigger only are recorded.
MODE2: The live pictures from the camera corresponding to the
alarm trigger are recorded together with the pictures
from the other cameras. (Default setting)
NOTE:
For further details, please refer to the example on the
next page.
DURATION
The recording duration can be set to:
01, 02, 03, 04, 05 (Default setting), 10, 30 seconds
3
(SENSOR SET)
ACTIVE REC MODE2
DURATION 05 S
POSITION/LEVEL SET
PRESS NEXT
QUAD LIVE
26
SETTING THE SENSOR POSITION AND
SENSITIVITY LEVEL
Example: To adjust the camera 2 sensor position and
sensitivity level to 3
1
From the (SENSOR SET) menu, press the NEXT button
twice to go to the sub-menu for camera 2.
•
The sub-menu for each camera is selected by pressing
the NEXT button.
•
The camera live picture is displayed, and the sensor
position and sensitivity can be adjusted for that camera.
2
Using the l (or c) button move the sensor frame down
(or right) to the desired sensor area position.
•
Press and hold the SHIFT button, then press the l
button to move the sensor frame up.
• Press and hold the SHIFT button, then press the c
button to move the sensor frame to the left.
•
Press and hold the SHIFT button, the press the + (or –)
button to adjust the bright of sensor frame.
3
Press the + (or –) button to raise (or lower) the sensor
sensitivity level (03).
NOTE: The displayed frame will flash if there is movement
within the sensor area during the setting.
The available sensitivity levels are:
OFF (not used), 1, 2,.....10 (10 being the most sensitive)
4
Press the EXIT button to return to the menu display,
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
1
(SENSOR SET)
ACTIVE REC MODE2
DURATION 05 S
ZOOM
POSITION/LEVEL SET
PRESS NEXT
NEXT
2
LIVE
MON2
CAM2 OFF
SHIFT
Menu 5
Sensor frame
CAM2 OFF
3
QUAD
CAM2 03
Sensitivity Level
English