Adjusting The Rotational Speed Channel, Power Measurement - HBM MGCplus Operating Manual

Measuring
Adapting to the transducer
System Display Amplifier
Transducer
Signal conditioning
Analog outputs
TRANSDUCER
Type
10V
Current feed None
Unit: V
kW
i
0.0000 ...
0.0000 ...
Zero pt.:
10.4720 ... 10.0000 ...
Nom. val.:
calibrate... Adjust amplifier
162
7.3.6
1. Use
Options
).
2. Use
3. Press the
Display
Switch
4. In the pull-up menu select Transducer and confirm with
5. Use
CHANNEL1
6. Use
as the unit and confirm with
7. In the left edit field Nominal (rated) value enter the value 10.472.
measure
8. In the right edit field Nominal (rated) value enter the value 10.
9. Use
you do not want to make any more changes to the display, you can now
continue with step 19.
10. Go back to the pull-up menu with
11. In the pull-up menu select Display and confirm with
A0534-30.0 HBM: public

Adjusting the rotational speed channel, power measurement

or a direct entry to choose the desired channel (for example 3.2
to switch to Setup mode.
function key.
to select 10V and confirm with
to switch to the Unit selection field and press
Adjust amplifier
to select the
.
.
button and confirm with
.
.
. Select kW
. If
.
MGCplus