Sanyo CAS-D6325 Instruction Manual page 9

GETTING
STARTED
Installing the Battery
IMPORTANT
Use only the SANYO rechargeable battery pack supplied with your cordless telephone.
1.
Press in on the handset battery case cover (use the finger indention for a better
grip) and slide the cover downward to remove.
2.
Plug the battery cable into the battery jack. Be sure to match the red and black
wires to the label near the jack. The cable should snap into place. Gently pull
on the battery cable. If the battery connector comes loose, try connecting again
until the battery connector clicks into place.
3.
Place the battery case cover back on the handset and slide it upwards until it
clicks into place.
UC590EH.indd E7 UC590EH.indd E7
BLACK BLACK
E7
RED RED
BLACK BLACK
RED RED
Click Click
8/19/2008 11:38:57 AM 8/19/2008 11:38:57 AM