Using Multiple Bases - Sanyo CAS-D6325 Instruction Manual

GETTING
STARTED

Using Multiple Bases

The handsets supplied with your phone can be registered to a total of four different CAS-D6325 bases. Once your handset
is registered to more than one base, you can set the handset to search automatically the available base, or you can select
manually which base the handset should connect to (for example, if you have one base with an answering machine, you
can tell the handset to connect that base to check messages).
Note:
• To confirm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step 1 of Selecting the Base on page
E16 ). Press to close the list and return to standby.
Registering the Handset to Another Base
To register a handset to another base:
1.
Make sure the handset battery is fully charged.
2. Disconnect the base AC adapter. Then press and hold FIND HS while you reconnect the adapter.
Keep pressing FIND HS until the charge LED starts to blink.
3.
On the handset, press MENU/SELECT. Select the REGISTER BASE menu. HANDSET REGISTERING will appear in the
display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to standby.)
4.
Wait approximately thirty seconds. REGISTRATION COMPLETE will be displayed to indicate the handset has been
registered to the base and a handset ID will be automatically assigned.
If REGISTRATION FAILED appears in the LCD, please try these steps again.
UC590EH.indd E15 UC590EH.indd E15
E15
8/19/2008 11:39:02 AM 8/19/2008 11:39:02 AM