Using The Intercom - Sanyo CAS-D6325 Instruction Manual

USING
YOUR PHONE

Using the Intercom

You can use the intercom to talk to another handset without using the phone line. The handsets must be currently
registered to the same base ( see page E16 ).
Making an Intercom Page
1. When the phone is in standby, press CLEAR/INT'COM.
2.
Use or to select the handset you want to talk with, and then press MENU/SELECT. Select ALL to page all other
handsets.
3.
To cancel the intercom page, press .
Notes:
Intercom paging will be cancelled if any of the following things occurs:
• You receive an outside call or an intercom page while selecting the other handset.
• You do not select a handset within thirty seconds.
• Your handset is out of range (OUT OF RANGE appears in the display).
• The party does not answer the page within one minute.
• The party is busy.
• The party is out of range (UNAVAILABLE appears in the display).
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the handset that is paging.
1.
Press /FLASH or CLEAR/INT'COM. If Auto Talk is on, the handset will automatically answer the page when you pick up
the handset from the cradle.
2.
To hang up an intercom page, press .
UC590EH.indd E29 UC590EH.indd E29
E29
8/19/2008 11:39:07 AM 8/19/2008 11:39:07 AM