Error Message Description (Part Of Errors) - Sanyo PJ MASTER POA-PJNM01 Owner's Manual

Error message description (part of errors)

There are some error comments on the error detail column as follows;
Global setting error
Error Message
Target command send error. (cmd=XXX*
Target command receive error. (cmd=XXX) Failed to receive the command
Target command communication error.
(cmd=XXX,res=YYY* )
2
Condition setting error
Error Message
Target condition command send error.
(cmd=XXX)
Target condition command receive error.
(cmd=XXX)
Target condition command communication er-
ror. (cmd=XXX, res=YYY)
Target condition command communication er-
ror. (cmd=XXX, res=YYY:ZZZ*
* XXX means each command name.
1
* YYY means response to the command.
2
* ZZZ means expected response to the command.
3
PJ update error
Error Message
Update PJ file error.
Update PJ FTP error
PJ-Net update error
Error Message
Update PJ-Net write error.
Update PJ-Net file error.
Update PJ-Net FTP error.
PJ Master update error
Error Message
Update PJ Master Error.
Failed to start the program.
Update PJ Master Error.
The version is not the same.
Update PJ Master Error.
Failed to stop the service.
Update PJ Master Error.
Failed to copy the file.
Update PJ Master Error.
Failed to run batch file.
Update PJ Master Error.
Failed to start the service.
Update PJ Master Error.
Internal error occurred.
Description
) Failed to send the command.
1
Unexpected response to the command
Description
Failed to send the condition command
Failed to receive the condition command
Unexpected response to the condition command
Unexpected response to the condition command
3 )
Description
The PJ Master failed to update firmware of the projector.
FTP error during updating firmware of the projector.
Description
Failed to create PJ-Net file
Failed to update PJ-Net file or file type
FTP error during updating firmware of the Network
Board
Description
Failed to start the update program
The PJ Master version error
Failed to stop the service
Failed to copy the update files
Failed to run the batch file
Failed to start the service.
Internal error occurred.
Viewing the status, alert and logs
PJ Master
Owner's Manual
37