Global Setting; Sending A Command - Sanyo PJ MASTER POA-PJNM01 Owner's Manual

Global setting

The PJ Master controls target by sending the specified control command via the network. The PJ
Master provides 24 kinds of basic commands for projector and 6 kinds of basic commands for PDP
monitor initially.You can also edit their commands or add new commands easily according to your
projector , PDP monitor or usage.

Sending a command

1. Select a target on the status list view window or a server on the tree view window.
- When setting the multiple targets together, select targets and/or servers on the status list view win-
dow with pressing "Shift" or "Control" key.
- If you select the server on the tree view or status list view window, the setting will be effected to the
targets linked under the selected server.
button on the tool bar or select Global Setting from Projector or PDP menu.
2. Click or
The setting window will appear.
- The commands which are not effective to the selection are disabled.
3.Tick check boxes next to the title name and then click OK to execute the command.The setting
window closes.
4. After that the targets will operate according to the sending commands.
* If there are some errors on the targets or servers, the PJ Master receives error information from the
servers or targets and indicates further details on the error log window. See item "Reading of error log"
for further information. (p.36)
Global setting
31
PJ Master
Owner's Manual