Sanyo PJ MASTER POA-PJNM01 Owner's Manual page 12

Chapter 2 Setup
12
3. Software License Agreement window appears.Thoroughly read the contents. If you agree to the
contents of the software license agreement, click Next.
4. Parameter window appears. Set parameters as below and click Next.
Item
MSDE Password
IP Address
Connected event
Alert
Status
Description
Enter the same password when used at the installation of the Microsoft
SQL Server Desktop Engine (p.10).You cannot install PJ Master software if
the password differs.
IP address of the computer appears automatically. If your computer provide
the multiple network cards, select an IP address which you want to use for
the PJ Master.
* If "127.0.0.1" appears, your computer is not connected to the network
correctly. Make sure that the LAN cable is connected to the computer and
try installation again.
Select "Alert" or "Status".
Displays the event as Alert when the target is disconnected from the net-
work.
Displays the event as Status when the target is disconnected from the net-
work.
* See item "Reading of alert log" (p.38) for further information.