Receiving And Handling; Receiving And Unpacking; Handling And Moving - Toshiba JK Series Instructions Manual

RECEIVING AND HANDLING

RECEIVING AND UNPACKING
U p o n r e c e i p t o f t h e e q u i p m e n t , d o t h e
following:
Make an immediate inspection for any
damage which might have occurred
during shipment (Fig. 1). If damage is
found, it should be noted with the
carrier prior to accepting the shipment,
if possible.
C a r e f u l l y u n p a c k
sufficiently to
damage and to determine that the
shipment is complete and correct.
Keep the equipment upright.
controller is not
notify the carrier of possible damage.
Upright the unit as soon as possible.
Do not lay the equipment
on its side or upside
down.
File a claim with the carrier for any
d a m a g e d o r
immediately notify
Representative.
Do not install or energize
equipment that has been
damaged.
HANDLING AND MOVING
Medium voltage motor controllers should be
handled with care,
components and to the frame or its finish
(Fig. 2).
The capability of the moving equipment to
handle the weight of the controller shipping
section should be confirmed.
The equipment should remain secured to the
shipping skid to prevent distortion of the frame
during m o v i n g a n d t o m i n i m i z e t i p p i n g .
Extreme care should be exercised during any
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
t h e e q u i p m e n t
check for concealed
If the
upright upon receipt,
missing item and
the nearest Toshiba
t o a v o i d d a m a g e t o
Fig. 1 Inspect The Controller
Fig. 2 Moving The Controller
Page 7