During Editing Programs - Leica AutoStainer XL Instructions For Use Manual

7.2.2 During editing programs

Station (x) and Station
(y) are in reverse order
The steps after Exit will
be ignored
Program (x) is in use for
staining and cannot be
altered
Leica AutoStainer XL – Automated slide stainer
The message occurs during a compatibility check of two programs. The stations
specified are in the opposite order in the two programs which cannot be used
concurrently.
Exit occurs before the end of the program and the remainder of the steps will be
ignored.
A program which is currently being used for staining cannot be altered. Copy the
program to another program number and then edit it.
7. Trouble shooting
41