Advertisement
Quick Links
AVENTOS HK-S
Required parts
Lift mechanism set
Wood or wide aluminum door mounting plate
Narrow aluminum door mounting plate
Recommended parts for tension adjustment
Use of a POZI bit insert and bit holder is recommended when adjusting the tension of the
lift mechanism.
Assembly instructions
Set includes:
Lift mechanism (qty 2)
▀
Cover plate (left and right)
▀
Also includes:
SCHR 4X35 — #7 x 35 mm (1-3/8")
▀
wood screw (qty 10)
Power factor
19 — 39
40 — 85
86 — 177
Wood or wide aluminum mounting plate (qty 2)
▀
Wood or wide aluminum mounting plate
Installation screw for wood doors
Installation screw for wide alum doors
Narrow aluminum mounting plate (qty 2)
▀
(for use with AVENTOS HK-S only)
Includes 699.1100 installation screws (qty 4)
▀
Narrow aluminum mounting plate
#2 x 2" POZI bit insert
1/4" bit holder
Subject to technical modifications without notice. © 2015
Opening angle
107°
107°
107°
Part no.
20K2B00.N1
20K2C00.N1
20K2E00.N1
Part no.
175H3100
606N or 606P
7072A
Part no.
20K4A00A02
Part no.
POZI BIT #2x2
BIT HOLDER
1
Advertisement
Related Manuals for BLUM Aventos HK-S
Summary of Contents for BLUM Aventos HK-S
- Page 1 606N or 606P Installation screw for wide alum doors 7072A Narrow aluminum door mounting plate Narrow aluminum mounting plate (qty 2) ▀ (for use with AVENTOS HK-S only) Includes 699.1100 installation screws (qty 4) ▀ Part no. Narrow aluminum mounting plate 20K4A00A02...
- Page 2 Assembly WARNING Risk of injury from spring-loaded arm Do not push arm assembly down or leave in the down position ▀ Remove mechanism before installing or removing cabinet ▀ Locating pin locations and minimum depth Panel Face frame 5 min. NOTE: Face frame cabinets must be blocked out flush with the frame.
-
Page 3: Attaching The Mounting Plates
Attaching the mounting plates Wood/wide aluminum frame doors Narrow aluminum frame doors 12.5 + Overlay NOTE: Attach each mounting plate with two 606N or 606P wood screws for wood doors, two 7072A screws for wide aluminum doors or two 699.110 screws for narrow aluminum doors Raise lever arm assembly with caution Standing at arm’s length carefully raise the For the 20K2B00.NA, carefully... - Page 4 Assembly Attaching the door Attach the door using the CLIP mechanism in the mounting plate. Adjust the door tension Use a screw gun, POZI driver bit insert and bit holder to adjust each lift mechanism to the desired tension. Subject to technical modifications without notice. © 2015...
- Page 5 Finalize the door adjustments ± 2 mm ± 2 mm ± 2 mm Use a POZI screwdriver on cam adjustments for each of the three 3-dimensional adjustments. Attach cover caps Place the left and right cover plates over the appropriate lift mechanisms and snap them in place. Subject to technical modifications without notice.
- Page 6 Removal WARNING Risk of injury from spring-loaded arm Do not push arm assembly down or leave in the down position ▀ Remove mechanism before installing or removing cabinet ▀ Removing the door Disengage the CLIP mechanism of the lever arm from the mounting plate ▀...
-
Page 7: Other Information
Door thickness .344 .375 .406 .438 .469 .531 13.5 .563 .594 .625 .656 .688 17.5 .719 .781 .813 20.5 .844 .875 Blum, Inc. .906 800-438-6788 sales.us@blum.com .938 blum.com .969 24.5 25.4 Subject to technical modifications without notice. © 2015 INST-AVT12-04.15...
Need help?
Do you have a question about the Aventos HK-S and is the answer not in the manual?
Questions and answers