BLUM 563H5330B Installation Instructions Manual

TANDEM plus BLUMOTION

Full extension concealed runners

Basic components

Side-to-side adjustment

1
Rotate side-to-side adjustment left or
right equally on both locking devices. Drawer
front moves in the same direction as rotation.
R
Drawer
front
L
R
L
0
Maximum 1.5 (1/16") to left or right in both front and rear (tool-free)
NOTE: Side-to-side adjustment not available on T51.x8xx locking devices
Subject to technical modifications without notice. © 2015 Blum Inc.
563H/563. installation instructions 563H/563. installation instructions
Locking devices g

Rear side-to-side adjustment

2
After front side-to-side adjustment is
made with the locking devices, rotate the
rear side-to-side adjustment left or right
to re-align the back of the drawer box with
the front. Drawer back moves in the same
direction as rotation.
0
R
L
R
L
Runners

Height adjustment

1
Press up on adjustment tab
2
Push towards back of drawer
2
1
Maximum 3 (1/8") rise of drawer front (tool-free)
NOTE: Height and tilt adjustments available with all combinations of locking devices and runners
Depth adjustable locking device
Locking device
T51.1901.PS
with side-to-side,
height and
depth adjustment
Turning the adjustment screw allows
for up to a + 2 .5 (3/32") out adjustment
NOTE: For T51.1901.PS setback in inset
applications, see page 5
1
Rear attachment options
Tilt adjustment
Rotate the tilt adjustment lever on the rear of
each runner to lift the back of the drawer and
tilt the top of the drawer front forward
Maximum 5 (3/16") rise of drawer back (tool-free)
Depth adjustment on runner
TANDEM 563 runners feature elongated
holes that allow ±4.5 (3/16") depth adjustment
Dimensions in millimeters (inch equivalents as noted)