Activating The 3Db Lna (Low Noise Amplifier) Feature; (Depending On The Model) - Samsung Colour TV/VCR Owner's Instructions Manual

Storing the Stations Manually
5
When the station to be stored appears on the screen, select the NEW PR.
option by pressing P
6
Enter the programme number to be assigned to the channel using the
numeric, + or - buttons.
7
Press MEMORY ( ) to store the station.
Result: :STORE is displayed briefly in red.
8
To store other stations, return to Step
Otherwise, press MENU (
to normal viewing.
If you wish to cancel the operation without storing the
station, press MENU (
( ).
If you have already stored the station, you can clear it
and replace it with a different station.
To clear a station, refer to the section entitled "Storing
and/or Clearing the Stored Stations" on page 14.

Activating the 3DB LNA (Low Noise Amplifier) Feature

This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise.
This feature is working only weak signal condition, and that is
memorized on current channel, additional.
1
Press the MENU button (
Result: The television menu is displayed.
2
Select the SETUP option by pressing P
followed by the + button.
3
To activate this feature, press the + button to set the 3DB LNA option to
ON.
4
Press the MENU button (
normal viewing.
5
If you wish to deactivate this feature, repeat the procedure and set the
3DB LNA option to OFF.
or P the required number of times.
4
.
) the appropriate number of times to return
) before you press MEMORY
).
or buttons one or more times,
) the required number of times to return to
(cont.)

(depending on the model)

CURRENT PR. : P O
NEW PR. : P 1
NAME : - - - - -
SEARCH :
FREQUENCY : 192.00MHz
AFT : ON
:STORE X:CLEAR EXIT
ADJUST SELECT
REC EJECT P/S CRYSTAL PB
INDEX MEMORY SLEEP
TRK LANG.SEL CLEAR
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST SELECT EXIT
SETUP
PANEL LOCK : OFF
ON TIMER : OFF
3DB LNA : ON
ADJUST SELECT EXIT
17
P 02