Storing The Stations Automatically (Depending On The Model) - Samsung Colour TV/VCR Owner's Instructions Manual

Combi vision combined colour television and video cassette recorder
Table of Contents

Advertisement

Storing the Stations Automatically
You can scan the frequency ranges available on your television and
in your country and store all the stations found automatically. If
you have a dual tuner model, the stations are stored for both tuners
at the same time (television and VCR).
The stations are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
programme numbers may not correspond to those by which you
wish to identify the stations. If this is the case, you can then sort
them manually and clear any stations that you do not wish to watch
(see page 14 for further details).
If you wish to receive a scrambled television station,
check that the decoder is switched off. Switch it back on
once you have finished storing the stations.
1
Press MENU (
).
Result:
The television menu, illustrated opposite, is displayed.
2
Select the TUNE option by pressing P
Result:
The tuning menu is displayed.
The TUNE option is not available if:
The AV input is selected; press INPUT (
ordinary station
A video cassette is playing; stop the cassette
3
Select the AUTO TUNE option by pressing P
Result:
The AUTO TUNE menu is displayed with the COUNTRY is
selected.
4
Select your country by pressing the +, The following countries are
available: AUSTRIA - BELGIUM - CROATIA - DENMARK - FINLAND
- FRANCE - GERMANY - ICELAND - IRELAND - ITALY -
NETHERLANDS - NORWAY - POLAND - SPAIN - SWEDEN -
SWITZERLAND - TURKEY - UK.
5
Select the AUTO TUNE option by pressing P
Result:
The scan starts and the stations are stored in the order in
which they are found, starting with programme 00. The scan
stops automatically once all the frequency bands have been
scanned.
You can stop the scan at any time by pressing MENU (
When the scan stops before more than two stations are stored,
many of the stored stations before the scan is done remain "stored".
(depending on the model)
, followed by the + button.
) to select an
, followed by the + button.
, followed by the + button.
).
INPUT
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST
SELECT
EXIT
TUNE
MANUAL TUNE
AUTO TUNE
ADJUST
SELECT
EXIT
AUTO TUNE
COUNTRY
: UK
AUTO TUNE
:
ADJUST
SELECT
EXIT
P 1
FREQUENCY
: 225.00 MHz
STOP
13
P 02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti-15x5

Table of Contents