Setting The Date And Time - Samsung Colour TV/VCR Owner's Instructions Manual

GB
V.MENU
DISPLAY
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST
TIME : 15:07
DATE : 06/04/00
ADJUST

Setting the Date and Time

MUTE
P
MENU
P
P.STD
SELECT EXIT
THU
SELECT EXIT
Pre.
12
Your COMBI VISION contains a 24-hour clock and calendar used
to:
Preset the VCR to record up to six programmes
automatically over a period of one month
Switch the set on or off automatically at a specific time
You must set the date and time when:
You purchase the COMBI VISION
The power supply is switched or cut off
1
Press MENU ( ) on the remote control.
Result: The television menu is displayed.
2
Select the option by pressing P
times, followed by the + button.
Result: The current date and time are displayed.
3
Enter the hour and then the minutes by pressing the numeric buttons.
When a time is entered, all single digits must be preceded by a
zero.
Example:
4
To select the date, press P
5
Press the numeric, + or - buttons to enter the:
Day
Month
Year
Result: The day of the week is displayed automatically next to the date.
When a date is entered, all single digits must be preceded by a
zero.
Example:
6
When you are satisfied with your settings, press MENU (
return to normal viewing.
If you do not press a button for more than 30 seconds, the
display disappears automatically.
If you make a mistake when entering the date or time,
press the button one or more times to return to the
-
incorrect figure and enter the correct one.
You cannot set the date and time during a programmed
recording.
or the appropriate number of
3:07 p.m.
Enter 15:07
.
6th April 2000
Enter 06/04/00
) twice to